Shenzhen Hpmont Technology Co., Ltd.
Chapter 5 Operation Instructions
HD5L Series Controller User Manual V1.4
―
39
―
5.2.2
Display Status
Note:
LCD anti-color displays: white on black display such as
,
,
,
etc.
1. If the parameter or the setting value is in anti-color displaying, it is changeable. Take
for
example; the units of setting value can be changed.
2. If the status is in anti-color displaying, it means that it is in this status. Take
for example, it means
that HD5L is in the run status.
Parameter display status at stop / run
When HD5l is in stop / run status, the keypad will display stop or run status and its parameters, as
shown in Figure 5-1.
Other parameters (F15.08 - F15.13) or (F15.02 - F15.07) can be displayed by pressing
.
Figure 5-1 Display status of stop (left) and run (right)
Function parameter editing status
At stop, run or fault alarm status, press
to enter function parameter edit status (see the
description of parameter F01.00 and the user password unlock and modify of section 5.2.3), as shown
in Figure 5-2.
Figure 5-2 Parameter editing status
Fault alarming status
If HD5L detects a fault signal, the keypad will enter the fault alarm status and LCD will display the fault
code and name and anti-color display
, as shown in Figure 5-3.
The fault history can be checked by entering Group F17.
Figure 5-3 Fault alarming status
The reset at fault can be achieved by pressing
key external terminal.
STOP
RUN
F0
3
： 0.3 5
0
m/s
0.3 5
0
m/s
RUN
Stop para.
Setting speed
=
1.5 0 0m/s
ALM
STOP
UP
LO/RE
Running para.
Setting speed
=
1.3 5 9m/s
ALM
RUN
UP
LO/RE
F0
3
:
Acc/Dec parameters
用户密码
ALM
STOP
UP
LO/RE
= 0.3 5
0
m/s
3
F03.13:
Stop Dec jerk
ALM
STOP
UP
LO/RE
ALM
Lu:
DC bus low
ALM
STOP
UP
LO/RE
请按键以检测其有效性
E0024:
External faulty
ALM
STOP
UP
LO/RE
请按键以检测其有效性
5