HP Storageworks 8100 - enterprise virtual array, Руководство пользователя

Страница: 284 / 408

Example:
MPX200 <1>(admin) #>
set ntp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
NTP (0=Enable, 1=Disable) [Disabled ]
0
TimeZone Offset from GMT (Min=-12:00,Max=12:00) [00:00 ]
-8:0
IP Address [1] (IPv4 or IPv6) [0.0.0.0 ]
207.126.97.57
IP Address [2] (IPv4 or IPv6) [0.0.0.0 ]
IP Address [3] (IPv4 or IPv6) [0.0.0.0 ]
All attribute values that have been changed will now be saved.
Set properties
Configures blade's CLI properties.
Admin session Authority
set properties
Syntax
Example:
MPX200 <1>(admin) #>
set properties
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
CLI Inactivity Timer (0=Disable, 1=15min, 2=60min) [15min ]
CLI Prompt (Max=32 Characters) [HP StorageWorks MPX200 ]
All attribute values that have been changed will now be saved.
Set SNMP
Configures general SNMP) properties and eight trap destinations.
Admin session Authority
[trap_destinations]<DEST_NUM>]]
set sn-
mp
Syntax
Example 1: The following example shows the
set snmp
command for setting general properties:
MPX200 <1>(admin) #>
set snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring SNMP :
-----------------
Read Community [ ]
Public
Trap Community [ ]
Private
System Location [ ]
System Contact [ ]
Command referencecommand reference 284