HP Storageworks 8100 - enterprise virtual array, Руководство пользователя

Страница: 103 / 408

a. Click Add under Target Portals.
b. Enter the IP address of the MPX200 iSCSI port.
c. Click Advanced .
d. Select the CHAP Login Information check box.
e. Enter the CHAP secret for the MPX200-discovered iSCSI initiator in the Target Secret box
(for example,
CHAPsecret01
).
f. Click OK .
The initiator completes target discovery.
• To use iSNS to discover iSCSI target portals:
a. Click Add under iSNS Servers.
b. Enter the IP address of the iSNS server.
c. Click OK .
2. Click Targets , and then select the appropriate target for login.
3. Click Log On .
4. Click Advanced .
5. Select the CHAP Login Information check box.
6. Enter the CHAP secret for the MPX200-discovered iSCSI initiator in the Target Secret box.
7. Click OK .
8. Click OK again.
The initiator completes normal login.
Enabling CHAP for the MPX200-discovered iSCSI initiator entry
You must use the CLI to enable CHAP for the MPX200-discovered iSCSI initiator entry:
• If the iSCSI initiator is not listed when you execute the
set chap
command, do one of the follow-
ing:
1. From HP Command View EVA, select Hosts , and then select the Add Host tab. Enter the IQN
string.
2. From the CLI, use the
add
command to add the iSCSI initiator that will perform the discovery.
• If the iSCSI initiator is listed when you execute the
set chap
command, then enable the CHAP
secret (for example, CHAPsecret01):
1. Select the index of the iSCSI initiator.
2. Enable CHAP by selecting 0 and then entering the CHAP secret.
Enabling CHAP for the Microsoft iSCSI initiator
To enable CHAP for the Microsoft iSCSI initiator:
MPX200 Multifunction Router 103