HP StorageWorks 2000 Series Скачать руководство пользователя страница 47

Страница: 47 / 330

To view a CHAP entry:

1. Select Manage > General Config > Manage CHAP.

The CHAP Entries panel lists entries by node name.

2. Click the entry to view.

The entry’s names and secrets are displayed in the CHAP Entry Details panel.

To modify a CHAP entry’s secret or mutual-CHAP values:

1. Select Manage > General Config > Manage CHAP.

The CHAP Entries panel lists entries by node name.

2. Click the entry to modify.

The entry’s names and secrets are displayed in the CHAP Entry Details panel.

3. Edit the values.

4. Click Modify Entry.

To delete a CHAP entry:

1. Select Manage > General Config > Manage CHAP.

The CHAP Entries panel lists entries by node name.

2. Click the entry to delete.

3. In the CHAP Entry Details panel, click Delete Entry.

4. Click OK to confirm the operation or Cancel to stop it.

The entry is removed from the CHAP Entries panel.

Содержание StorageWorks 2000 Series











































































































































































































































































































































Результаты поиска

Содержание StorageWorks 2000 Series

Отзывы:

HP StorageWorks 2000 Series, Справочное руководство, Страница: 47 / 330

Результаты поиска

Содержание StorageWorks 2000 Series

Отзывы: