HP StorageWorks 2000 Series, Справочное руководство, Страница: 34 / 330

SMU allows a maximum of 13 users, including the three default users shown in
Table 2-1.
To add a user:
1. Select Manage > General Config > User Configuration > Add Users.
The Add System User panel displays the current list of configured users.
2. Type a new username.
The name is case sensitive and can include 19 characters. Allowed characters
include letters, numbers, hyphens, underscores, and spaces.
3. Type a password.
The password is case sensitive and can include # characters. Allowed characters
include letters, numbers, hyphens, underscores, and spaces.
4. Select an access level:
Monitor enables access to all functions on the Monitor menu.
Manage enables access to all functions on the Monitor and Manage menus.
5. Select a user type:
Standard enables access to most functions.
Advanced additionally enables access to infrequently used administrative
functions.
Diagnostic additionally enables access to troubleshooting functions for use by
service technicians.
6. Enable or disable the user’s access to system interfaces:
WBI – The web-browser interface (SMU)
CLI – The command-line interface
FTP – The file transfer protocol interface
A system interface can be used only if the corresponding network
management service is enabled on the Manage > General Config > Services
Security page.
7. Click Add User.
The user is added to the Add System User panel.