HP StorageWorks 2000 Series Скачать руководство пользователя страница 197

Страница: 197 / 330

The System Summary page shows you the overall status of the storage system.

To view storage system status:

1. Select Monitor > Status > Status Summary.

2. Check the status icon at the upper left corner of each panel.

A green icon

indicates that components associated with that panel are

operating normally.

A red icon with an exclamation point

indicates that at least one component

associated with that panel has a fault and is operating in a degraded state or is
offline.

3. Review each panel that has a fault icon.

4. Look for red text in the panels.

Red text indicates where the fault is occurring. In Figure 7-1 for example, the panels
indicate a fault related to controller module B.

5. To gather more details regarding the failure, click linked text next to the fault icon.

The associated status page is displayed.

Содержание StorageWorks 2000 Series











































































































































































































































































































































Результаты поиска

Содержание StorageWorks 2000 Series

Отзывы:

HP StorageWorks 2000 Series, Справочное руководство, Страница: 197 / 330

Результаты поиска

Содержание StorageWorks 2000 Series

Отзывы: