HP StorageWorks 2000 Series, Справочное руководство, Страница: 19 / 330

SMU distinguishes users by the IP addresses from which they log in. If you log in
to SMU using multiple browser instances on the same management host, SMU
considers all instances as a single user. Actions you take in one SMU instance are
reflected in the other SMU instances on the same host. A controller permits only
one browser instance for each management host IP address. Do not log in more than
once from the same host.
Each SMU user has a Monitor or Manage access level, as described in “User Roles”
on page 31. If a Manage user does not log out of SMU when finished using it, other
Manage users cannot log in to the same controller, and the IP address stays logged
in until the auto-logout timeout expires.
SMU permits one Manage user and up to five Monitor users to be logged into a
controller at the same time.
To log in to SMU:
1. In a web browser’s address field, type the IP address of one of the Ethernet
management ports and press Enter.
The Log In page is displayed.
If the page does not display, verify that you entered the correct IP address.
In a dual configuration, if you still cannot access a controller, try entering the IP
address of the partner controller’s Ethernet port. If you still cannot access SMU,
verify the IP settings by using the CLI
command
through a serial connection on a local management host.
2. On the Log In page, type the username and password.
The default Manage username is and the default password is .
To secure the storage system, change each Manage user’s password as
described in “Configuring User Access” on page 31.