manualshive.com logo in svg

HP StorageWorks 2000 Series, Справочное руководство, Страница: 294 / 330

Поделиться
Скачать
HP StorageWorks 2000 Series Скачать руководство пользователя страница 294

233

Warning

The specified drive type is invalid 
and not allowed in the current 
configuration.

One or more drives are not allowed 
for this platform. They have been 
removed from the configuration. 
(Some platforms are SAS- or 
SATA-only). Replace the 
disallowed drives with ones that 
are supported.

234

Critical

The specified snap pool is 
unrecoverable and can therefore no 
longer be used.

All the snapshots associated with 
this snap pool are invalid and the 
user may want to delete them. 
However, the data on the master 
volume can be recovered by 
converting it to a standard volume.

235

Informational

A non-disk SCSI device, such as an 
EMP or partner controller, has 
reported a check condition. 

236

Informational

A special shutdown operation has 
started.

237

Informational

A firmware update has started and is 
in progress.

238

Warning

An attempt to write license data 
failed due to an invalid license. 

Check the license for what is 
allowed for the platform, make 
corrections as appropriate, and 
reinstall. If the license is invalid, 
the write will fail. 

239

Warning

A timeout has occurred while 
flushing the compact flash.

Cycle power and restart the system.
If the error persists, save the log 
files and contact a service 
technician.

240

Warning

A failure has occurred while flushing 
the compact flash.

Cycle power and restart the system.
If the error persists, save the log 
files and contact a service 
technician.

Содержание StorageWorks 2000 Series











































































































































































































































































































































Отзывы:

Нет отзывов