manualshive.com logo in svg

HP StorageWorks 2000 Series, Справочное руководство, Страница: 130 / 330

Поделиться
Скачать
HP StorageWorks 2000 Series Скачать руководство пользователя страница 130

9. Click Create Task.

The Tasks panel is updated and task information is displayed in the Task Details 
panel.

To view information about existing tasks:

1. Select Manage > Scheduler > Manage Scheduler.

The Tasks panel shows the name, type, and status of existing tasks.

If a task fails, an error icon   is displayed and the task type and status are shown in 
red. The task remains in the current state until an associated schedule initializes the 
task to run again. An error message in the Task Details panel specifies the failure 
reason.

2. For more information about a task, click a task name.

For a Take Snapshot task, the Task Details panel shows:

Task name and type
Task status (Ready or Active)
Task state (Init, Vol Verified, License Checked, Name Created, Snap Created, or 
Snap Verified)
Master volume name and serial number
Snapshot prefix
Retention count
Last snapshot created, if the task has run
Retained snapshots, if any
Error message, if any

For a Reset Snapshot task, the Task Details panel shows:

Task name and type
Task status (Ready or Active)
Task state (Init or Snap Verified)
Snapshot name and serial number
Error message, if any

For a Volume Copy task, the Task Details panel shows:

Task name and type
Task status (Ready or Active)
Task state (Init, Vol Verified, Name Created, or Vol Created)
Source volume name and serial number
Destination virtual disk name and serial number
Destination volume prefix

Содержание StorageWorks 2000 Series











































































































































































































































































































































Отзывы:

Нет отзывов