manualshive.com logo in svg

HP StorageWorks 2000 Series, Справочное руководство, Страница: 265 / 330

Поделиться
Скачать
HP StorageWorks 2000 Series Скачать руководство пользователя страница 265

The SAS storage system uses Unified LUN Presentation (ULP). ULP is a controller 
software feature that enables hosts to access mapped volumes through both 
controllers’ host ports (target ports) without the need for internal or external 
switches.

In a dual-controller SAS system, both controllers share a unique node WWN so they 
appear as a single device to hosts. The controllers also share one set of LUNs to use 
for mapping volumes to hosts.

A host can use any available data path to access a volume owned by either 
controller. The preferred path, which offers slightly better performance, is through 
target ports on a volume’s owning controller.  

Ownership of volumes is not visible to hosts. However, in SMU you can 

view volume ownership and change the owner of a virtual disk and its volumes.

In the following configuration, both hosts have redundant connections to all mapped 
volumes.

Содержание StorageWorks 2000 Series











































































































































































































































































































































Отзывы:

Нет отзывов