HP StorageWorks 1510i - Modular Smart Array Скачать руководство пользователя страница 24

Страница: 24 / 160

Item 1

Activity LED

Item 2

Online LED

Item 3 Fault

LED

Meaning

Off

The hard drive is being accessed in

one

of the following ways:

•

The hard drive is not con

gured as part of an array.

•

The hard drive is a replacement and rebuild has not yet started.

•

The hard drive is spinning up during POST.

Do not remove the hard drive. Removing a hard drive at this time could

terminate the current operation and cause data loss.

Blinking

The hard drive is being accessed in

one

of the following ways:

•

The hard drive has been selected for identi

cation in HP-SIM,

MSA-CLI, or other supported management utility.

•

The hard drive is being upgraded.

Do not remove the hard drive. Removing a hard drive at this time can

cause data loss in non-fault-tolerant con

gurations.

Off

The hard drive is not being accessed and is not con

gured as part of an

array. If necessary, it is safe to replace the hard drive. This hard drive

is in

one

of the following states:

•

The hard drive is not con

gured as part of an array.

•

The hard drive is con

gured as an online spare.

On or off

Blinking

Off

The hard drive is being accessed in

one

of the following ways:

•

The hard drive is a replacement hard drive and is being rebuilt.

•

If the online LEDs of all of the other hard drives in the array are

blinking, an expansion is occurring.

Do not remove the hard drive. Removing a hard drive at this time can

cause data loss.

Off

The hard drive has failed and has been placed of

ine. It is safe to

replace the hard drive.

Off, on, or

blinking

Off

The hard drive is online and con

gured as part of an array, If necessary,

and if all other hard drives in the same array are online and working, it

is safe to replace the hard drive.

one

of the following is happening:

•

If the Activity LED is off, the drive is con

gured and online but not

currently active.

•

If the Activity LED is on or blinking, the drive is con

gured, online,

and currently active.

Off, on, or

blinking

On or off

Blinking

A predictive failure alert has been received for this drive. Replace the

hard drive as soon as possible.

System components and LEDs

Содержание StorageWorks 1510i - Modular Smart Array

































































































































































Результаты поиска

Содержание StorageWorks 1510i - Modular Smart Array

Отзывы:

HP StorageWorks 1510i - Modular Smart Array, Руководство пользователя, Страница: 24 / 160

Результаты поиска

Содержание StorageWorks 1510i - Modular Smart Array

Отзывы: