a.
Click
Find External Group
.
b.
Enter the user name in the Enter AD User Name box and click
OK
.
c.
Select the correct group from the list that opens of Active Directory Groups and click
OK
.
5.
Click
OK
when you have finished editing the group.
6.
Log out of the management group and log back in using your UPN login (e.g.,
[email protected]) to verify the configuration.
Removing the Active Directory configuration
NOTE:
HP recommends logging in as a local SAN/iQ user to remove the Active Directory
configuration or external group association.
To remove the Active Directory credentials from the SAN:
1.
Select the Administration category of the management group.
2.
Click
Administration Tasks
and select
Configure External Authentication
.
3.
Click in each field and delete the data in the field.
4.
Click
Save
.
To remove the external group association from the SAN/iQ group, which saves the credentials
for use with a different SAN/iQ group:
1.
Select the Administration category of the management group.
2.
Select the group with the external group association, click
Administration Tasks
and select
Edit Group
.
3.
Click in the
Associate an External Group
field and delete the data.
4.
Click
OK
to save the group without the external group association.
Using Active Directory for external authentication
81