$ xterm
3.
In the xterm window, start minicom as follows:
$ minicom -c on -l NSM
Opening the Configuration Interface from the terminal emulation session
1.
Press
Enter
when the terminal emulation session is established.
2.
Enter
start
, and press
Enter
at the log in prompt.
3.
When the session is connected to the storage system, the Configuration Interface window
opens.
Logging in to the Configuration Interface
Once you have established a connection to the storage system, log in to the Configuration Interface.
Table 73 Logging in depends on where the storage system is
From Configuration Interface entry window
If the storage system is in
Press
Enter
to log in. The Configuration Interface main menu
opens.
Available Systems pool
Management group
1.
Press
Enter
to log in.
2.
Enter the user name and password of the administrative
user created for the management group.
3.
Tab to
Login
, and press
Enter
.
NOTE:
This user is viewable in the CMC under the management group Administration category.
Configuring administrative users
Use the Configuration Interface to add new administrative users or to change administrative
passwords. You can only change the password for the administrative user that you used to log in
to the Configuration Interface.
1.
On the Configuration Interface main menu, tab to
General Settings
, and press
Enter
.
2.
To add an administrative user, tab to
Add Administrator
, and press
Enter
. Then enter the new
user’s name and password. Confirm password, tab to
OK
, and press
Enter
.
3.
To change the password for the user that you are currently logged in as, tab to
Change
Password
, and press
Enter
. Then enter the new password. Confirm password, tab to
OK
, and
press
Enter
.
4.
On the General window, tab to
Done
, and press
Enter
.
Configuring a network connection
The storage system comes with two Ethernet interfaces.
Table 74 (page 240)
lists where interfaces
are labeled and the label name.
Table 74 Identifying Ethernet interfaces on the storage system
Ethernet Interfaces
What the label says
Where labeled
Name:
TCP/IP Network configuration category in the CMC
•
TCP/IP tab
eth0, eth1
Motherboard:Port0, Motherboard:Port1
•
TCP Status tab
G4-Motherboard:Port1, G4-Motherboard:Port2
240 Using the Configuration Interface