HP LeftHand Storage Скачать руководство пользователя страница 101

Страница: 101 / 282

Select a storage system in the navigation window.

Open the tree below the storage system and select

Diagnostics

Select the

Log Files

tab.

Select the log in the Remote logs list.

Click

Log File Tasks

and select

Edit Remote Log Destination

Change the log type or destination and click

Ensure that the remote computer has the proper syslog configuration.

Deleting remote logs

Select a storage system in the navigation window.

Open the tree below the storage system and select

Diagnostics

Select the

Log Files

tab.

Click

Log File Tasks

and select

Delete Remote Log Destination

Click

to confirm.

NOTE:

After deleting a remote log file from the storage system, remove references to this log file

from the syslog configuration on the target computer.

Exporting the management group support bundle

If asked to do so by HP Support, export the management group support bundle. The support bundle
is saved as a

.zip

file.

Export the management group support bundle using one of the following methods:

•

Select a management group in the navigation window, right-click and select

Export

Management Group Support Bundle

•

From the CMC menu bar, select

Tasks

→

Management Group

→

Export Management Group

Support Bundle

Select the location to save the file.

NOTE:

You cannot change the name of the

.zip

file.

Click

Save

Exporting the storage system support bundle

If asked to do so by HP Support, export the storage system support bundle. The support bundle is
saved as a

.zip

file.

Access Export storage system Support Bundle using one of the following methods:

•

Right-click a storage systemstorage system and select

Export storage system Support

Bundle

•

From the CMC menu bar, select

Tasks

→

System

→

Export storage system Support Bundle

•

From the Diagnostics category under a storage system, click

Log File Tasks

→

Export storage

system Support Bundle

Select the location to save the file.

NOTE:

You cannot change the name of the

.zip

file.

Click

Save

Exporting the management group support bundle

101

Содержание LeftHand Storage



























































































































































































































































































Результаты поиска

Содержание LeftHand Storage

Отзывы:

HP LeftHand Storage, Руководство пользователя, Страница: 101 / 282

Результаты поиска

Содержание LeftHand Storage

Отзывы: