manualshive.com logo in svg

HP Integrity rx7640, Руководство по обслуживанию

HP Integrity rx7640 - мощный сервер с возможностью конфигурации под любые задачи. Здесь вы можете бесплатно скачать руководство пользователя для настройки и использования этого устройства. Посетите {сайт} для загрузки.

Поделиться
Скачать
background image

2.

Issue the

shutdown

command with the appropriate command-line options.

The command-line options you specify dictate the way in which HP-UX is shut down,
whether the nPartition is rebooted, and whether any nPartition configuration changes take
place (for example, adding or removing cells).

Use the following list to choose an HP-UX shutdown option for your nPartition:

•

Shut down HP-UX and halt the nPartition.

•

Shut down HP-UX and reboot the nPartition.

Issue the

shutdown -r

command to shut down and reboot the nPartition.

•

Perform a reboot for reconfiguration of the nPartition.

Issue the HP-UX

shutdown -R

command to perform a reboot for reconfiguration.

This shuts down HP-UX, reconfigures the nPartition if needed, and reboots the
nPartition.

•

Reboot the nPartition and put it into the shutdown for reconfiguration state.

Use the HP-UX

shutdown -R -H

command to hold the nPartition in the shutdown

for reconfiguration state.

This leaves the nPartition and all its cells in an inactive state (the nPartition can be
reconfigured remotely), unless the normal behavior has been modified.

To reboot the nPartition, you must do so manually by using the

BO

command at the

management processor Command Menu.

If HP-UX is halted on the nPartition, thus not allowing you to use the

shutdown

command,

you can reboot or reset the nPartition by issuing commands from the management processor
Command Menu.

System Verification

The minimum firmware version supported at release of the HP 9000 rp7440 Server is rp8440 and
rp7440 Firmware Version 1.0.

After the system firmware is updated, use the management processor (MP)

cm

menu to verify

status using the

sysrev

command.

 MP:CM> sysrev    Cabinet firmware revision reportPROGRAMMABLE HARDWARE :System Backplane :    GPM         EMMUX
                  -----------  -----------                  001.001.000  001.000.000IO Backplane     :  IO_LPM-0
     IO_LPM-1                    -----------  -----------                  001.001.001  001.001.001Core IO    
      :   CIO-0        CIO-1                   -----------  -----------                  001.002.000  001.002.000
                    CELL_LPM    CELL_JTAG     CELL_PDH                  -----------  -----------  -----------Cell
 0 :          000.000.000  000.000.000  000.000.000 - not installedCell 1 :          001.002.000  001.002.000 
 001.005.000 FIRMWARE:Core IO  MP-0          :  B.002.005.008   ED-0          :    002.006.000  MP-1          
:  B.002.005.008   ED-1          :    002.006.000Cell 0 - not installed  PDHC          :  B.000.000.000   PDHC
          :  B.000.000.000                 :    000.000.000                          :    000.000.000         
 Cell 1   PDHC          :  B.023.003.031 - Active   PDHC          :  B.022.002.003            PDC_FW        : 
   042.006.000 - Active   IPF_FW        :    004.080.000 

Verify that the processors are reporting by using the management processor (MP) Main Menu
and using the

in pr

command to display their status:

Main Menu: Enter command or menu > in prPROCESSOR INFORMATION        Cab/                                     
                Processor Cell   Slot   CPU    Speed     HVERSION   SVERSION   CVERSION     State   ----   ----
   ---   --------   --------   --------   --------  --------------   1    0/1    0A    1068  MHz   0x8900     
0x0491     0x0401    Active                    0B    1068  MHz   0x8900     0x0491     0x0401    Idle         
             1A    1068  MHz   0x8900     0x0491     0x0401    Idle                      1B    1068  MHz   
0x8900     0x0491     0x0401    Idle                      2A    1068  MHz   0x8900     0x0491     0x0401    
Idle                      2B    1068  MHz   0x8900     0x0491     0x0401    Idle                      3A    
1068  MHz   0x8900     0x0491     0x0401    Idle                      3B    1068  MHz   0x8900     0x0491     
0x0401    Idle                    Partition Total Cells: 1        Partition Total Processors: 8       Partition
 Active Processors: 8 Partition Deconfigured Processors: 0

System Verification

183

Содержание Integrity rx7640




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Integrity rx7640

cable matters 604002 User Manual preview
604002
Бренд: cable matters Страницы: 12
GearMo GM-FTDI2-LED16-C User Manual preview
GM-FTDI2-LED16-C
Бренд: GearMo Страницы: 6
Lindy TosLink User Manual preview
TosLink
Бренд: Lindy Страницы: 21
TwinMOS Netkey 73-TMWBG-001 Use Manual preview
Netkey 73-TMWBG-001
Бренд: TwinMOS Страницы: 25
SWEEX LC203 Introduction Manual preview
LC203
Бренд: SWEEX Страницы: 8
Paradyne ACCULINK 3150 Operator'S Manual preview
ACCULINK 3150
Бренд: Paradyne Страницы: 234
Allen-Bradley 140G-G-DRA Installation preview
140G-G-DRA
Бренд: Allen-Bradley Страницы: 4
ReSound Phone Clip+ Getting Started preview
Phone Clip+
Бренд: ReSound Страницы: 2
UGREEN CM668 User Manual preview
CM668
Бренд: UGREEN Страницы: 21
Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card User Manual preview
dx-uc202 - USB 2.0 PCMCIA Notebook Card
Бренд: Dynex Страницы: 16
D-Link Vonage VTA-VR Quick Installation Manual preview
Vonage VTA-VR
Бренд: D-Link Страницы: 8
D-Link Vonage VTA-VR User Manual preview
Vonage VTA-VR
Бренд: D-Link Страницы: 23
D-Link WUS-B12 Manual preview
WUS-B12
Бренд: D-Link Страницы: 44
D-Link XTREME N DUAL BAND USB ADAPTER DWA-160 User Manual preview
XTREME N DUAL BAND USB ADAPTER DWA-160
Бренд: D-Link Страницы: 60
D-Link WNA-1330 User Manual preview
WNA-1330
Бренд: D-Link Страницы: 70
D-Link Xreme N DWA-160 User Manual preview
Xreme N DWA-160
Бренд: D-Link Страницы: 61
D-Link WUA-1340 User Manual preview
WUA-1340
Бренд: D-Link Страницы: 78
D-Link WDA-2320 RangeBooster G User Manual preview
WDA-2320 RangeBooster G
Бренд: D-Link Страницы: 81

Бренды по названию

Популярные бренды

Загрузить еще бренды