HP Integrity rx7640, Руководство по обслуживанию

Страница: 113 / 195

5. Exit the console and management processor interfaces if you are finished using them.
To exit the console environment, press
^B
(
B
); this exits the console and returns
to the management processor Main menu. To exit the management processor, enter
X
at the
Main menu.
Shutting Down Microsoft Windows
You can shut down the Windows OS on HP Integrity servers using the Start menu or the
shutdown
command.
CAUTION: Do not shut down Windows using Special Administration Console (SAC)
restart
or
shutdown
commands under normal circumstances.
Issuing
restart
or
shutdown
at the
SAC>
prompt causes the system to restart or shut down
immediately and can result in the loss of data.
Instead, use the Windows Start menu or the
shutdown
command to shut down without loss of
data.
To shut down Windows use either of the following methods.
• Select
Shut Down
from the
Start
menu, and select either
Restart
or
Shut down
from the
drop-down menu.
Selecting the Restart menu item shuts down and restarts the system. Selecting the Shut
down menu item shuts down the system.
You can use this method when using the Windows graphical interface.
• Issue the
shutdown
command from the Windows command line.
Refer to the procedure “Windows Shutdown from the Command Line” (page 113) for details.
You can issue this command from a command prompt through the Special Administration
Console (SAC) or from any other command line.
The Windows
shutdown
command includes the following options:
/s
Shut down the system. This is the equivalent of
Start—>Shut Down, Shut down
.
/r
Shut down and restart the system. This is the equivalent of
Start—>Shut Down,
Restart
.
/a
Abort a system shutdown.
/t
xxx Set the timeout period before shutdown to xxx seconds. The timeout period can
range from 0–600, with a default of 30.
Refer to the
help shutdown
Windows command for details.
NOTE: On HP rx7620, rx7640, rx8620, and rx8640 servers, performing a shutdown using
shutdown /s
(or the equivalent Start—>Shut Down, Shut down ) powers off the server cabinet
or powers off the cells and I/O chassis assigned to the nPartition. You can customize this behavior.
For details, refer to
“ACPI Softpowerdown Configuration—OS Shutdown Behavior” (page 92) .
On HP Integrity Superdome servers, the Windows
shutdown /s
command shuts down the
system and keeps all cells at the boot-is-blocked (BIB) inactive state.
Procedure 4-16 Windows Shutdown from the Command Line
From the Windows command line, issue the
shutdown
command to shut down the OS.
1. Log in to Windows running on the system that you want to shut down.
For example, access the system console and use the Windows SAC interface to start a
command prompt, from which you can issue Windows commands to shut down the the
system.
Booting and Shutting Down Microsoft Windows 113