horsch Maestro 12.45 CV, Руководство по эксплуатации

Страница: 95 / 155

Small seeds kit / scraper
1. Remove the inspection flap, see chapter
Metering unit.
2. Hook in the mounting plate:
3. Install the pertaining inspection flap. Tighten
the screw only firmly enough so that the grain
dispenser can just be opened and closed:
4. Thread the required scraper on the bottom
and let it engage toward the top:
1
5. Check for firm seating and complete engage -
ment.
6. Check the scraper for axial mobility on the
screws; clean if necessary.
7. For disassembly, squeeze the catch (1) to -
gether and pull out the scraper.
Remove the inspection flap and mounting
plate.
Cleaning the metering unit
¾
If components need to be removed, see Re-
placing components.
1. Open the inspection flap and blow out the
metering unit.
Close the inspection flap after cleaning and
let it snap in.
3.
Blow out the metering unit and the area of
the perforated plates.
4. Clean the brush of the grain dispenser (1).
The bristles must not protrude into the seed
channel!
1
90 91