horsch Maestro 12.45 CV, Руководство по эксплуатации

Страница: 49 / 155

Parking the machine unfolded
1. Position the machine at a suitable location,
unfold and set the tractor brake.
2. Apply the parking brake (option).
3. Secure the machine with wheel chocks
against rolling away. Position the wheel
chocks under the side of the tyres pointing
to the downward slope.
4. Lift the seed bar.
5. Remove the clips from the hydraulic cylinders
on the undercarriage.
6. Place trap rollers in parking position.
7. Lower the seed bar completely.
8. Direct the bottom plate on the support down-
ward. Secure the pin with the cotter pin.
9. Crank down the support.
10. Unplug the brake lines, ISOBUS and lighting
and hook in the bracket. Attach the covering
caps.
11. Depressurise the hydraulic lines and discon-
nect them.
12. Unhitch the machine.
Machines with drawbar eye
- Position the drawbar by cranking on the
support to be able to release the bolt.
- Release the bolt and move the machine to
clear.
Machines with ball and socket coupling
- Release the hold-down.
- Raise the drawbar by cranking on the sup-
port until the ball has cleared.
13. Drain the air reservoir of the pneumatic
brake system (option)
14. Clean the metering units.
15. Close the hopper covers.
16. Store the terminal in dry conditions.
Anti-theft devices
The anti-theft devices protect the machine
against unauthorised use. The securing devices
are attached to the hitch or drawbar eye and
secured with a lock.
Securing device for ball coupling
Securing device for drawbar eye
machines with tractor link arm hitching are pro-
tected against unauthorised use by a padlock,
which is hung into a hole on the tractor link arm
shaft.
Hooking up a ball head and connecting the ma-
chine with the tractor is thus impossible.
45