horsch Maestro 12.45 CV Скачать руководство пользователя страница 60

Страница: 60 / 155

Fan - vacuum

The hydraulic fan for vacuum generation is

directly driven by the tractor hydraulics or by a

PTO-shaft pump (option).

For direct drive, the tractor must be equipped

with a flow control valve to control the fan speed.

Vacuum is essential for the function of the single

grain metering unit.

The vacuum is generated in the fan and builds

up in hose assembly, the frame and the meter-

ing units.

WARNING

Danger of injuries on the vacuum fan

Never operate the fan without the

fan discharge .

Deactivate the fan drive before dismantling

the fan discharge and secure it against re-

starting.

NOTE

All components of the vacuum system must be

absolutely leak tight. Leaks will cause sowing

faults.

1 Vacuum fan with hydraulic motor

2 Exhaust air hose

Maintenance

WARNING

Hazard from harmful dust (fertiliser, dressing) on

all components of the pneumatic system.

Always wear suitable protective clothing

(safety goggles, respiratory masks, protective

gloves) for cleaning and repair work.

Do not breath the exhaust air from the vac-

uum fan.

Observe the safety data sheets of the fertiliser

and dressing manufacturers.

Deactivate the fan drive before beginning

with maintenance work and secure it against

restarting.

Check hoses and connections every day.

During use open the cleaning covers on the

frame and clean frame and hoses, see chap-

ter

Care and maintenance

NOTE

Damaged or squashed hoses or defective

connections must be immediately replaced

or repaired

Содержание Maestro 12.45 CV




























































































































































Результаты поиска

Содержание Maestro 12.45 CV

Отзывы:

Похожие инструкции для Maestro 12.45 CV

Бренды по названию

Популярные бренды

horsch Maestro 12.45 CV, Руководство по эксплуатации

Результаты поиска

Содержание Maestro 12.45 CV

Отзывы:

Похожие инструкции для Maestro 12.45 CV

Бренды по названию

Популярные бренды