Honeywell XI581AH Скачать руководство пользователя страница 71

Страница: 71 / 108

XI581/2 BUSWIDE OPERATOR INTERFACE

ALPHABETIC REFERENCE

EN2B-0126 (74-3554-8)

Access Level

You must have access level 3 to perform this task.

Select Parameters from the Main Menu

At the Main Menu, use the arrow keys to move to and highlight

Parameters.

Press Enter (

↵

) to complete the selection.

RESULT: The display window shows the first parameter file associated with the

controller. Each parameter file represents a group of up to 127
individual parameters.

Parameter File No. :

001

Parameter No.

001

Parameter Value

70.00

BACK

NOTE:

The controller can contain up to 127 parameters in each of 128

parameter files.

Select a Parameter File/

Select a Parameter

Use the arrow keys to move to and highlight the parameter file number or
parameter number within the file shown and press Enter (

↵

) to edit. Use the plus

and minus keys to increment/decrement data, and press Enter (

↵

) to complete

the field entry.

RESULT: The display window refreshes with the new parameter file.

Parameter File No. :

002

Parameter No.

001

Parameter Value

10.00

BACK

Modify the Parameter Value

Use the arrow keys to move to and highlight the parameter value for the

parameter shown and press Enter (

↵

) to edit.

RESULT: The last, right-most digit in the Value field blinks, indicating that you

can modify it.

Use the plus or minus keys to increment or decrement the digit, respectively.

When the digit is correct, use the arrow keys to move to the next digit. Repeat
this procedure until all digits are correct.

Press Enter (

↵

) to complete entry in the Value field.

To return to the Main Menu, use the arrow keys to move to and highlight

Back

Press Enter (

↵

Passwords

Purpose

To modify an XI581/2 password.

Access Level

You must have access level 3 to perform this task.

Procedure

After the XI581/2 is connected to a controller, the Main Menu automatically

appears in the display window.

NOTE:

If the Main Menu does not appear, press Cancel (C) until it does.

RESULT: The Main Menu appears.

Password

is highlighted by default so that

level-2 and level-3 operators can enter their passwords.

Содержание XI581AH













































































































Результаты поиска

Содержание XI581AH

Отзывы:

Honeywell XI581AH, Руководство пользователя, Страница: 71 / 108

Результаты поиска

Содержание XI581AH

Отзывы: