Honeywell XI581AH Скачать руководство пользователя страница 65

Страница: 65 / 108

XI581/2 BUSWIDE OPERATOR INTERFACE

ALPHABETIC REFERENCE

EN2B-0126 (74-3554-8)

ATTENTION

While next mask is displayed, the
DIO value processing is disabled!

BACK

CONTINUE

Use the arrow keys to move to and highlight

CONTINUE

and press Enter (

↵

) to

complete the selection.

RESULT: The display window lists the all Distributed I/O modules needed for the

loaded applications, even if they are unassigned.

Edit DIO Module Assignment

XFLF521

0001FC234056

▲

XFL523

0001FC234088

XFL522

■

XFL524/29

IP-Bus Board

▼

Modules that have been assigned have their module type and Neuron ID displayed

beside them. Special characters indicate the status module according to the

following key:

An exclamation mark indicates that the module was previously assigned to this

controller in CARE but is now being used by another controller.

A minus sign indicates that the module is assigned but not yet commissioned.

This is the default state after assignment.

A question mark indicates that the module is assigned but not available or not

found during commissioning.

If no special character is seen alongside a module name, this indicates that the

module is correctly assigned and commissioned.

NOTE:

This screen is refreshed to show changes of state of the modules, such as

if the module is assigned to another controller, the conflict will be

displayed.

To change an assignment, select any line (module address) by using the arrow

keys to move to and highlight it and then pressing Enter (

↵

). If a specific module

is selected, an intermediate mask is displayed, while the controller searches on

the L

ORKS

network for all modules with the specified module address and

module type.

Please be patient, while

DIO Modules will be searched

After a brief period, the next screen is displayed. The display window
lists all modules of the same type and of the same address. The
search can be canceled by pressing Cancel (C).

Содержание XI581AH













































































































Результаты поиска

Содержание XI581AH

Отзывы:

Honeywell XI581AH, Руководство пользователя, Страница: 65 / 108

Результаты поиска

Содержание XI581AH

Отзывы: