XI581/2 BUSWIDE OPERATOR INTERFACE
EVERYDAY OPERATIONS
37
EN2B-0126 (74-3554-8)
Modem Configuration
Baudrate:
9600
GSM PIN : ********
Reset Modem
BACK
Baudrate
Enter the baudrate for the modem interface.
GSM PIN
Enter the password to enable GSM communication.
Reset Modem
Returns modem to factory default settings, erasing any custom
modem initialization. See section "Remote Communication"
(page 69) for more information.
8.
If necessary, modify the modem baud rate or GSM PIN. Use the arrow keys to
move to and highlight a field, press Enter (
↵
) to select the field, use the plus and
minus keys to increment/decrement data, and press Enter (
↵
) to complete the
field entry.
When selecting the 'GSM PIN' field
:
Press Enter (
↵
) to select the field. The first, left-most digit in the field begins
blinking.
Press the plus or minus keys to increment/decrement the digit.
Press the right arrow key to move to next digit.
When completed, press Enter (
↵
) once to confirm PIN.
NOTE:
The PIN must be entered right-justified.
IMPORTANT:
For GSM communication, MODEM PART must be enabled, and the
modem baud rate must be set to 9600.
To send a reset command to the modem to return it to factory default settings,
use the arrow keys to move to and highlight
Reset Modem
, and press Enter (
↵
)
to complete the selection.
9.
Use the arrow keys to move to and highlight
BACK
and press Enter (
↵
) to
return.
Enabling/Disabling the Remote Trend Buffer
If 'Enable Remote Trend Buffer' or 'Disable Remote Trend Buffer' is selected, the
following screen appears:
Please be patient,
while firmware restarts
RESULT: If either 'Enable Remote Trend Buffer' or 'Disable Remote Trend
Buffer' are selected, the controller restarts with the new memory con-
figuration.
Configuring the Remote Trend Buffer
If 'Configure Remote Trend Buffer' is selected, the following screen appears: