Honeywell XI581AH Скачать руководство пользователя страница 44

Страница: 44 / 108

EVERYDAY OPERATIONS

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

RESULT: The display window lists application programs in Flash EPROM with

their burn date and time.

Please choose Fixed Application

APPL_1

23.05.95 10:43

▲

APPL_2

17.03.96 17:02

■

APPL_3

11.11.97 23:00 1

APPL_4_NAME_ZU_LA 26.03.98 20:30

■

APPL_5

08.08.98 14.26

▼

NOTE:

The Flash EPROM can save more than one controller application

program. If two or more application programs have the same name,

the most recently saved application program appears at the bottom of

the list of application programs.

Load application from Flash EPROM

Use the arrow keys to move to and highlight the desired application program

and then press Enter (

↵

) to complete the selection.

RESULT: The application program in Flash EPROM loads in RAM and the

display window shows the Main Menu (access level 1).

CONTROLLER_07

18:16

Init

15.12.1994

Password

Alarms

Time Programmes

Trend Buffer

Data Points

System Clock
System Data

Requesting a Download

New applications can be downloaded to the controller’s Flash memory via the C-
Bus or the B-port. The controller must request the download from the device

executing the download. This option is found in the first 'Application Selection'

screen.

Application Selection

Select FLASH Application

Request Download

NOTE

The

Select FLASH Application

option appears only if there is at

least one application loaded in Flash EPROM.

Request Download

Use the arrow keys to move to and highlight

Request Download

and press

Enter (

↵

) to complete the selection.

RESULT: The following screen appears.

Please Execute Download

NOTE

After an application has been downloaded, the controller checks the

CARE application’s user ID and will not start the application if the ID

Содержание XI581AH













































































































Результаты поиска

Содержание XI581AH

Отзывы:

Honeywell XI581AH, Руководство пользователя, Страница: 44 / 108

Результаты поиска

Содержание XI581AH

Отзывы: