manualshive.com logo in svg

Honeywell XI581AH, Руководство пользователя, Страница: 6 / 108

Поделиться
Скачать
Honeywell XI581AH Скачать руководство пользователя страница 6

INTRODUCTION

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

2

Manual Organization

Purpose

This manual explains how to connect and operate the XI581/2.

Organization

This manual is divided into the following sections, including this introductory section.
The 

Introduction

 section briefly describes the XI581/2 and highlights similarities

and differences between the two operator terminal models.
The 

Getting

 

Started

 

section describes:

•

  XI582AH connection to an Excel controller. (The XI581AH is mounted directly on

an Excel controller at installation time.)

•

 Buswide 

access 

mode.

•

  Display area description and keypad operations.

•

  Password access levels that determine whether you can view and/or modify

information using the XI581/2.

The 

Everyday Operations

 

section explains tasks that you might perform daily or

weekly.
The 

Alphabetic Reference

 

section explains tasks that you do not perform regularly

or in any particular order. The tasks are arranged alphabetically for easy lookup.

Appendix A: Hardware Setup

 describes how to route the cable for an XI582AH

that does not mount on the wall or an Excel controller. This section also describes

how to enable/disable the integrated backlighting feature for either the XI581AH or

XI582AH.
The 

Index

 provides page number references to topics.

Содержание XI581AH













































































































Отзывы:

Нет отзывов