Honeywell XI581AH Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 108

Honeywell XI581AH Скачать руководство пользователя страница 68

ALPHABETIC REFERENCE

XI581/2 BUSWIDE OPERATOR INTERFACE

EN2B-0126 (74-3554-8)

64

RESULT: The controller begins erasing Flash EPROM and displays the

message: Erasing Flash EPROM, please wait. Erasing the Flash-
EPROM can take up to 30 minutes depending on the activity of your
application.
When done, the display window lists options for controlling Flash
EPROM. Continue with Step 3 in the procedure for Saving
Application Data in RAM to Flash EPROM.

Erasing a Specific Application

It is not possible to erase one specific application from the EPROM while
maintaining other applications.

Saving Application Data from RAM to Flash EPROM

Purpose

To save controller application data from RAM to Flash EPROM.

Access Level

You must have access level 3 to perform this task.

Select System Data from Main Menu

1.

At the Main Menu, use the arrow keys to move to and highlight

System Data.

Press Enter (

↵

) to complete the selection.

RESULT: The 'System Data' screen displays with controller name and software

version as well as three possible functions (depending on access
level).

System Data

System Info

HW-Interface Config.
Flash EPROM
Buswide Access

Select Flash EPROM

2.

Use the arrow keys to move to and highlight

Flash EPROM

and then press

Enter (

↵

) to complete the selection.

RESULT: The 'Flash EPROM' screen lists options for controlling Flash EPROM.

Save application

is highlighted by default.

Flash EPROM

Save Application

Erase Flash EPROM
Show Applications

Save application to Flash EPROM

3.

Press Enter (

↵

) to select Save Application.

NOTE:

The save procedure writes application data to Flash-EPROM. The

save procedure does not affect application data in RAM.

RESULT: If there is sufficient space in the Flash EPROM, the controller begins

saving application data in RAM to Flash EPROM and displays the
message: burning Flash EPROM, please wait.
When done, the display window lists system data.
If the message “Couldn’t burn EPROM” displays, check that the
controller has a Flash EPROM. If it does and there are no hardware
problems, the Flash EPROM is probably out of memory. Erase the
Flash EPROM (previous procedure) and try to save again.

4.

Press Cancel (C) to return to the Main Menu for operator access level 3.

«
...
66
67
68
69
70
...
»

Содержание XI581AH













































































































Отзывы:

Нет отзывов