Honeywell HTRD400 Скачать руководство пользователя страница 44

Страница: 44 / 176

Rev 1.02

Document 900.0328

05/05

HTRD BusView™ Toolbox and BusView™ Player Installation

Repeat

step 4

to verify that the Player application has successfully installed by

double-clicking the BusView icon on your desktop.

If you accepted the program defaults during installation, you can also start the
BusView Player application by clicking Start on the Windows taskbar and then
selecting Programs

➤

BusView

➤

BusView.

Uninstalling the Toolbox and Player Software

There may be occasions when you need to uninstall the Toolbox and Player software (for
example, when you are upgrading to a new version).

Note

Uninstalling the software does not remove any archive files, search files, or
configuration files created with the applications.

Note

You must be logged in to the operating system with administrator privileges
to uninstall the Toolbox and Player software.

To uninstall the software:

Close all running Windows applications.

Remove the existing Toolbox and Player software:

From the Start menu, select Settings

➤

Control Panel

➤

Add or Remove

Programs.

In the programs list, select BusView.

Click Change/Remove.

The Installation Wizard displays, followed by the main Uninstall dialog box.

To uninstall the Toolbox and Player applications, click Next.

Click OK to confirm the uninstall action.

A progress bar indicates the status of the uninstall action. When you see the
message

Maintenance Complete

, click Finish to exit the uninstaller.

Confirm that the BusView entry in the Add or Remove Programs dialog box has been
deleted, then exit this screen.

Содержание HTRD400

















































































































































































Результаты поиска

Содержание HTRD400

Отзывы:

Honeywell HTRD400, Справочное руководство, Страница: 44 / 176

Результаты поиска

Содержание HTRD400

Отзывы: