Honeywell HTRD400 Скачать руководство пользователя страница 24

Страница: 24 / 176

Rev 1.02

Document 900.0328

05/05

Installation

(Optional) Wire the HTRD4GPS module, if installed. Refer to the

HTGPS Module

Installation Application Note

for more detailed information.

Install the HTCD Digital Camera(s).

Connect the HTRD400 Recorder to the HTCD Digital Camera(s) using the CAT5
straight data/power cables supplied.

Install the Toolbox and Player software on the PC or laptop that you will use with the
HTRD400 Recorder (see

Chapter 3, HTRD BusView™ Toolbox and BusView™ Player

Installation

Connect the PC or laptop to the COMPUTER port on the front panel of the HTRD400
Recorder (see

Chapter 4, PC to HTRD400 Recorder Connection

Caution

Do not connect the PC or laptop to any of the CAMERAS ONLY ports
on the recorder rear panel to avoiding damaging your equipment.

10. Start the Toolbox application and use the HTRD400 System Setup Wizard to

configure the HTRD400 system for desired operation (see

Chapter 5, System

Configuration

). The HTRD400 System Setup Wizard helps you:

Configure a recorder

Configure triggers

Configure cameras, including aiming and focusing

(Optional) Enable GPS data gathering, if supported

Set up record rules

Set up user accounts and passwords

11. Upload the configuration to the HTRD400 Recorder.

Choosing the Location

Choose a location for installation of the HTRD400 Recorder that:

•

Provides convenient access for connecting a PC or laptop for viewing and archiving
images

•

Allows air to flow around the fan vents. Inadequate or improper air flow can impede
proper operation of the unit.

•

Conforms with local regulatory guidelines

Avoid any location for installation:

•

That is subject to high vibration

•

That is subject to high sunlight levels

•

Where passengers can interfere with the unit

•

Next to a heater duct

Содержание HTRD400

















































































































































































Результаты поиска

Содержание HTRD400

Отзывы:

Honeywell HTRD400, Справочное руководство, Страница: 24 / 176

Результаты поиска

Содержание HTRD400

Отзывы: