manualshive.com logo in svg

Honeywell HTRD400, Справочное руководство, Страница: 27 / 176

Поделиться
Скачать
Honeywell HTRD400 Скачать руководство пользователя страница 27

HTRD400 System Reference Guide

Rev 1.02

13

Document 900.0328

05/05

Mounting the HTRD400 Recorder

The HTRD400 Recorder is intended for indoor use only. It can be mounted horizontally 
(suspend or support mounted) or vertically. 

Figure 2-3

 shows all the possible ways to 

mount the HTRD400 Recorder. Use the two L-brackets supplied with the install kit to mount 
it in any of the ways shown.

Figure 2-3

Installation Mounting Options

1.

Prepare the mounting surface. Mark and pre-drill holes for the four #10 x 3/4 inch 
sheet metal mounting screws included in the hardware package.

2.

Attach the L-brackets (supplied) to the mounting surface using the sheet metal 
mounting screws supplied. If desired, you may also use a suitable substitute.

3.

Secure the HTRD400 Recorder to the two L-brackets with #10-32 x 3/8 inch machine 
screws (supplied).

Horizontal mount

Vertical mount

Side mount

Содержание HTRD400

















































































































































































Отзывы:

Нет отзывов