Honeywell HTRD400 Скачать руководство пользователя страница 158

Страница: 158 / 176

Rev 1.02

144

Document 900.0328

05/05

Solutions

Save Error Messages

The following table describes messages you may encounter when saving images or clips
to a file.

This message …

Means …

Player encountered an error while
archiving the data. Try archiving again.

Displays when the start and end times of
the archive are the same. Increase the
duration.

Indicates there is not enough free storage
space on your PC to store the archive.
Reduce the time duration of the archive or
select another destination with sufficient
free space.

Displays when the archive is too large for
the file system. Reduce the time duration
of the archive.

Note

If your hard drive is formatted
FAT32, the maximum file size is
4 GB.

Indicates an unsupported file format.
Player supports the following file formats:

•

.jpg for individual images

•

.swc for clips (partial or full)

•

.exe for Player Lite executable files

Any other file extension will result in the
“unsupported format” warning.

Содержание HTRD400

















































































































































































Результаты поиска

Содержание HTRD400

Отзывы:

Honeywell HTRD400, Справочное руководство, Страница: 158 / 176

Результаты поиска

Содержание HTRD400

Отзывы: