Rev 1.02
16
Document 900.0328
05/05
Installation
2.
Remove the 3A fuse from the fuse holder. Connect the fuse holder and wiring harness
to the vehicle battery.
Connecting the HTRD4GPS Module
to connect the HTRD4GPS module to the wiring harness. For information
on configuring GPS, please see
. For more detailed information
on installing the HTRD4GPS module, please refer to the
Installing the Camera(s)
Typically, the primary camera is installed inside at the front of the bus, on a bulkhead or
ceiling, looking towards the back of the vehicle. Suggested locations for other cameras are:
•
On the ceiling halfway down the aisle
•
On the bulkhead looking towards the driver and the front door
Note
Adjustment of the camera field of view (FOV) is limited after you complete the
installation. For this reason we recommend you hold the camera in the
desired position and confirm the FOV using the Toolbox application prior to
drilling any holes or mounting the camera. See
for more information.
Mounting the Camera(s)
Step 1
Preparing the Mounting Surface
To prepare the mounting surface:
1.
Use the security hex key provided to unscrew the four security screws securing the
enclosure cover to the base. The screws are held in the cover by o-rings.
Содержание HTRD400
