manualshive.com logo in svg

Holtek HT-IDE, Руководство пользователя, Страница: 90 / 258

Поделиться
Скачать
Holtek HT-IDE Скачать руководство пользователя страница 90

•

Status 6

–

LCM display
CHIP MISMATCHED

–

Valid keys
ESC: return to the Primary function state
ENT: verify the next OTP chip

–

Description
This message warns that the OTP chip in the textool is of a different
type from the programmed data file. Another OTP chip may be placed
on the TEXTOOL and the ENT key pressed to verify.

→

Primary function - Blank check

•

Subfunction

–

LCM display
BCK: PLACE DEVICE

–

Valid keys
a) ESC: return to the previous state (Primary function state)
b) ENT: start the BLANK CHECK function if the OTP chip has been
     placed in the TEXTOOL

–

Description
This message warns the user to place the OTP chip in the TEXTOOL if
not already there.

When the programmer starts to check the OTP chip, the following status
may be displayed.

•

Status 1

–

LCM display
BCK: aa

–

Valid keys
ESC: return to the Primary function state

–

Description
The programmer is checking the OTP chip, aa is the current address of
the OTP chip ROM. The number changes in the checking procedure, and
the following status may be displayed.

•

Status 2

–

LCM display
BCK: PASS (or BCK: FAIL)

–

Valid keys
ESC: return to the Primary function state
ENT: blank check the next OTP chip

–

Description
The message “BCK:PASS” is displayed if the OTP chip has been checked
and there is no data in the OTP chip. The message “BCK:FAIL” is
displayed if there is some data is inside the OTP chip or if other
problems occurred within this chip.

HT-IDE User’s Guide

80

Содержание HT-IDE



































































































































































































































































Отзывы:

Нет отзывов