manualshive.com logo in svg

Holtek HT-IDE, Руководство пользователя, Страница: 187 / 258

Поделиться
Скачать
Holtek HT-IDE Скачать руководство пользователя страница 187

            Fig 14-3

Set up the LCD Panel File

The following two steps are used to setup a panel file:

•

Set the panel configurations. This data includes the segment and common
number of the LCD driver as well as the width and height size of the panel
in pixels. This is displayed on the screen as well as the directory of the
panel file and the dot matrix mode selection.

•

Select the patterns and their positions. This will setup the relationship
between the patterns and the COM/SEG positions.

Set the panel configurations

The only way to set the panel configuration is to create a new panel file by
selecting the File menu, New command. The Panel Configuration dialog
box, in Fig 14-4, will be displayed along with the corresponding panel file
name. Set the correct data for each item in the box and press the [OK]
button. The screen returns to Fig 14-2 for pattern selection.

    Fig 14-4

Chapter 14   LCD Simulator

177

Содержание HT-IDE



































































































































































































































































Отзывы:

Нет отзывов