manualshive.com logo in svg

Holtek HT-IDE, Руководство пользователя, Страница: 32 / 258

Поделиться
Скачать
Holtek HT-IDE Скачать руководство пользователя страница 32

                            Fig 3-8

OTP programmer

The OTP (One Time Programmable) programmer supports functions for
programming the OTP ICs. Refer to the chapter on usage of the HT48RX0
OTP programmer. The function of this command is the same as the pro-
gram-item icon Prgw48 in the HT-IDE group.

Library manager

The Library Manager command, in Fig 3-9, supports the library functions.
Program codes used frequently can be compiled into library files and then
included in the application program by using the Project command in the
Options menu. (Refer to Linker options item in Options menu, Project
command). The functions of Library Manager are:

•

Create a new library file or modify a library file

•

Add/Delete a program module into/from a library file

•

Extract a program module from a library file, and create an object file

HT-IDE User’s Guide

22

Содержание HT-IDE



































































































































































































































































Отзывы:

Нет отзывов