Holtek HT-IDE Скачать руководство пользователя страница 173 | Manualshive

Страница: 173 / 258

Holtek HT-IDE Скачать руководство пользователя страница 173

Play with sample rate

HT-VDS827 compression tool also provides an on-line play function if a
sound card is installed. To listen to the sound of the compressed voice file,
select a compressed file in the sound list box and press the button .
Press the button to stop. The sampling rate of the playing sound
can be adjusted by selecting the appropriate sampling rate. If it is required
to listen to the original sound of the source file, double click the source file
in the Files list box with the right mouse. This function allows the sound
before and after compression to be compared and the best choice made.

File menu

The File pop-up menu consists of New, Open, Save as... and Print... com-
mands.

→

New

Create a new project.

→

Open

Open an existing project.

VOC file must exist in the same directory with .VPJ file. If not, the HT-
VDS827 will create a new one.

→

Save As...

Save the current edited project under a new file name.

Chapter 13

µ

C VROM Editor (HT-VDS827)

163

«
...
171
172
173
174
175
...
»

Содержание HT-IDE



































































































































































































































































Отзывы:

Нет отзывов