Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
19
／
51
4.2.1.2.1.2 Arc
When configuring arc, the point information is shown below.
Fig. 4.2.1.2-6 consists of 2 output points.
Fig
4.2.1.2.1.2 Example of Arc configuration
The point information of an arc shape consists of the 2 angles to each point
from the starting angle of 0° on the main view and saves the information of the
radius of arc. The output area of an arc shape is configured from these 2 angles
and the radius of the arc. When the radius of one point is changed, the radius of
other point is also changed of same value. If either of one point is deleted, the
other point and the output region will be also deleted.
