Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
28
／
51
2. Set the method of teaching. “Average Value” calculates the average values of the
distance scanned during teaching and selects this value as the background. “Minimum
Value” selects the minimum value scanned during the teaching and selects this value
as the background.
3. Specify distance
offset. During teaching with distance offset of 100 [mm], configure an
image similar as illustrated in Fig. 4.2.1.2.4-3. The pink waveform is the configured
region and the green waveform indicates the distance. The difference between the
pink and green waveform is the difference of offset value.
Fig 4.2.1.2.4-3 Display the region configured by teaching (pink) and
Distance region (green)
4. In the event of minimizing point displayed during teaching, place a check in “Simplify
the result”. When there is no check, it will display the point of each step of the region in
which the background exists.
Fig 4.2.1.2.4-4
Left: When a check placed in “Simplify the result”
Right: When not check in “Simplify the result”
5. Teaching will start when “
Teach” is clicked. In order to set teaching region
to the sensor, it is necessary to write the configuration to the sensor.
