Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
37
／
51
□
After fault simulation test is done, the sensor will be in fault state temporarily. In order
to return to the normal state from the test, restart the sensor and it is necessary to
reconnect.
□
When the input value is 0 and output value is 1 IO simulation cannot be done. It shows
in Fig. 4.5-5 the display in such condition because laser is off in Area 0. During a laser
off state, area configuration cannot be configured and detection determination is not
possible either.
Fig 4.5-5
Display of IO lamps when IO simulation with the input value is 0
Caution
