Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
30
／
51
4.2.2 Monitor
In this screen, data measurement, record and play of log data, IO information check
and monitoring of a sensor are performed.
Fig
4.2.2-1 Monitor screen
IO information that is displayed in the monitoring screen is configured as illustrated in Fig.
4.2.2-2. The input values are binary numbers (0 indicates gray while 1 indicates green) and
the area numbers are displayed as decimal values. Status display of the output lamp is
explained in Table 4.2.2
Fig
4.2.2-2
IO lamp display in monitor screen
(Top: Display when disconnected from the sensor, Bottom: Display when connected to the sensor)
Table 4.2.2
Status display of IO lamp
Lamp
Description
Displays when disconnected from the sensor or IO in the OFF state.
Numbers on the each lamp are IO values.
Display when the input is in ON state.
Numbers on the each lamp are IO values.
Output 1 lamp ON during object detection.
Output 2 lamp ON during object detection.
Output 3 lamp ON during object detection.
Area Number
Input No.
Output No.
