Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
21
／
51
4.2.1.2.2 Dependent
This section will explain how dependent-shaped outputs of the region are
changed within the range of outer most (upper) output. The outer most output refers
to Output 1 (yellow) within this area is Output 2 (orange) and lastly Output 3 (red)
referenced to Output 2. Since Output 1 is the outer most output, when it is changed,
the regions of Output 2 and Output 3 are changed automatically. Straight line, Fan
shape, and Ratio are the types of dependent shapes. As shown in Fig. 4.2.1.2.2
blue offset bar can be used for different area configuration. When the offset bar is
selected, it will be displayed in a lime green (yellow- green) color.
The configurable range of the offset bar is within the range of 0 – 100%.
When selecting a dependent shape, Default offset bar will be displayed as in Fig.
4.2.1.2.2. The value of offset bar can be set through left-clicking the mouse.
□
Output 1 as the outermost range, it is not possible to configure as a dependent
shape.
□
It is possible to delete the offset value of the point by right clicking of the mouse when
the offset bar is selected, or press delete or the backspace key on the keyboard. The
offset bar as shown in Fig.4.2.1.2.2.will be displayed in the default position of the
coordinate origin.
Fig 4.2.1.2.2 Default position of dependent offset bar
Cautions
Quick/Useful tips
