Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
17
/
51
4.2.1.2.1.1 Polygon
Polygons can be used as a configured area if the intended shape of the
output cannot configure as arc or rectangle. The information shown with a
polygon configuration will display the numbers of points configured and X and
Y coordinates of each point in the main view window. As shown in
Fig.4.2.1.2.1.1 here is an example of polygon
configuration.
Fig
4.2.1.2.1.1-1 Example of polygon configuration
When a point is deleted, the output will be configured to form a straight line
between one point to another depending on the one removed. If one is the center
point, then the output will be configured such that one point it forms a straight line
with the center point. When all the points are deleted other than the center point,
the entire output region will be deleted.