Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
27
／
51
4.2.1.2.4 Teaching
Only when polygon as an independent shape is selected, then
“Teaching” tab
next to “Coordinates” tab will be active. When teaching tab is clicked the
configurations screen as illustrated in Fig. 4.2.1.2.4-1 will be displayed. It will be
possible to set the teaching function. This teaching function enables an area to
be configured based on a background obtained by scanning the sensor.
Fig
4.2.1.2.4-1 setting of teaching
Operating method is configured in the order as illustrated in Fig. 4.2.1.2.4-1.
1. Specify the region to perform teaching. Click [Select] in the default state, and the pink
dot will be displayed in the center of the main view. Specify the region with this round
dot. Also, it is possible to specify the region by selecting the values for “top left”
(numerical input on the left is the X coordinate value and numerical input on the right is
the Y coordinate value) and “size” (the numerical input on the left is the width from the
top left and numerical input on the right is the height from the top left).
Fig 4.2.1.2.4-2 Specify the region for teaching
1
2
3
4
5
top left
：
：：
：
(XY)
= (-1000[mm]
、
、
、
、
1000[mm])
Width
：
：：
：
2000[mm]
Height
：
：：
：
2000[mm]
