Seite 82 von 99
C4
Unbalance compensation (B9450 / B9460 Version)
Displayed on selection:
"C4" in left display, "0" or "1" in right display. Factory setting is "0".
Step 1 options:
A. Spin wheel to compensate for adaptor unbalance.
The digit "1" is displayed in the left display to indicate the step number.
All adaptors, cones and wheels must be removed from the machine shaft.
Lower the hood to commence a spin. After the spin is complete the machine will then beep and the
function will exit.
The machine stores the new compensation values and exits to the service menu.
B. Alternatively, if C4 is already active when the service code is selected, the PLUS or MINUS keys will
toggle the status of the code between 0 and 1. Pressing RETURN with 0 displayed cancels the code. If 1
is displayed and return is pressed an error beep is generated as to enable the function the shaft must be
spun.
Pressing the PLUS and MINUS keys together at any stage will act like an Escape key and exit the code
without changing anything.
C7
Volume of Audible Signals
Displayed on selection:
"C7" in left display, "0" - "9" in right display. Factory setting is "5".
Step 1 options:
Select the required volume using the PLUS and MINUS keys. Press RETURN to confirm the value.
Pressing the PLUS and MINUS keys together at any stage will act like an Escape key and exit the code
without changing anything.
Содержание Snap-on Y2k
