Hofmann Snap-on Y2k, Руководство по обслуживанию

Страница: 60 / 99

Seite 60 von 99
C Description
CRT,HNA,
HWT
GS JBEG
96
Indication of motor current.
97
Conditioning of the solenoid brake
S
98
Display of angular position of power clamp pulley, incremental encoder test (see
C74).
S
99
Disabling the plane separation calculator.
100
Indication of the unbalance data in Cartesian coordinates.
101
Indication of the vibrations picked up by the unbalance transducers as an
effective value.
102
Performing a measuring run and indication of harmonic contents of the
unbalance signals
S
103
Test of the transimpedance and unbalance signal amplifiers
S 2.3
104
Test the RC time constant of the unbalance transducers
S 2.2
105
Set the parameters for the HUMSR feature with an EMB
S 2.6
106
Test watch-dog timer.
107
Indication of the difference of the angular momentum of the motor between
forward and reverse rotation.
108
Test and measurement of the relay delays.
109
Save service/user mode for next power-on.
110
Indication of the operating voltages supplied by the power supply module.
S S 4.21
111
Belt tension: Measure first harmonic of the belt.
S 2.2 S 0.24
112
113
114
115
Calibration of the unbalance measurement with a test rotor. (see C83)
116
117
118
119
120
Enable / disable the laser pointer (OPTIMA machines)
Optima
121
Set the geometric matching bead seat recommendation threshold (OPTIMA
machines)
Optima
122
Position calibration of the OPTIMA hardware.
Optima
123
Display of the STATUS and DIAGNOSTIC flags of the OPTIMA sub-system
and perform manufactoring/diagnostic tests.
Optima