Seite 80 von 99
16. Service Menu
The service menu is accessed by holding down the plus and minus keys for 7 seconds when
the machine is idle. Note: The service menu is for service personnel only. Not for customers.
The last service code used since power on is displayed.
The service codes available can be accessed by using the plus and minus keys and selecting the desired
code by pressing the return key.
The service menu can be exited by pressing the plus and minus keys together. The display is cleared and
a beep is generated.
17. Service Codes
C0 Setting
Factory
Defaults
Displayed on selection:
"0" in display.
Step 1 options:
The PLUS or MINUS keys will toggle the displayed value between zero and one. Pressing RETURN with
"1" displayed will reset the factory defaults for; rim dimensions, weight placement mode, weight
placement selection mode, unbalance resolution, gram / ounce unbalance display, machine volume and
unbalance suppresion threshold (3.5g).
Pressing the PLUS and MINUS keys together at any stage will act like an Escape key and exit the code
without changing anything.
Содержание Snap-on Y2k
