Scanreco G2 radio remote control system
7
HMF Technical Service Department
Rev.:
20-13
Radio controller
The design of the radio controller:
1. Standard antenna (possibility for connecting external antenna)
2. Tumbler switch, Manual-OFF-Remote
3. M12 plug for remote control cable
4. LED status indication of the functional condition
5. LED display, 2 x 7 segment
•
Plastic box with protection class IP65.
•
All electric in- and outputs are protected against polarity reversal, over current and EMC/FR.
•
Power supply: 12/24 V direct current (+/- 20 %, max. ripple 5 %).
•
Built-in radio receiver.
•
Tumbler switch:
In Remote position, the crane is
controlled from the remote control box.
In Manual position, the crane is
manually controlled by means of the
control valve levers.
In OFF position, the radio controller is
completely interrupted.
•
All electronics are cast.
•
Built-in 10 ampere positive fuse.
•
All electric in- and outputs are
connected via plug and socket-outlets.
•
The cable lead-ins at the bottom can
be dismounted.
•
Different cable kits are used depending
on the system configuration.
