Scanreco G2 radio remote control system
13
HMF Technical Service Department
Rev.:
20-13
The Scanreco G2 radio remote control system and CGW 5355
In the service terminal CGW5355 a number of functions, used for setting-up, downloading,
monitoring and reading of error log in relation to the G2 radio remote control system, have been
implemented.
Most of the SG2 set-up is carried out in the PWM Mixer feature as indicated in Fig. 7.
Survey of CGW 5355 functions
•
Profile > View > Setup > Features > PWM Mixer
o
Digital: K4.1-6 and K6.9
o
PWM:
PWM Max Current
PWM Start Kick
PWM Frequency
PWM Dither Freq
Source: PWM 1A, K1.1 – PWM 8B, K3.15
Source Setup: A/B Proportional, A/B Digital and A/B Digital, hold
Min. Current: 0-100 %
Max. Current: 0-100%
Ignore Dump
•
Network > CAN-Modules > Network: 100 Scanreco G2
•
Monitor > Output signals > Remote: Button 1-28
•
Black box
o
Error 1-50
Timestamp: date and time stamp
Emergency error: CAN error code
Manufacturer error: SG2 error code
RCL error: Error code indicated on the RCL display
•
Tools:
o
<Download Icons>
o
<Download Texts>
Fig. 7
PWM Mixer ...25.1
Digital
PWM
Digital
Digital ...1.1
K4.1 ENGINE FULL
K4.2 ENGINE START
K4.3 ENGINE STOP
K4.4 ENGINE RPM P
...
K6.9 None
K4.1 ENGINE FULL
PWM ...2.1
PWM Max Current 1000mA
PWM Start Kick 10%
PWM Frequency 200Hz
PWM Dither Freq 70Hz
Source
...
Source
Features ...1.25
Display
Regeneration
Stabilizer con
Remote control
Stab safety sys
PWM Mixer
PWM Mixer
Source ...5.2
PWM 1A, K1.1 Slew
PWM 1B, K1.3 Slew
PWM 2A, K1.5 Boom
PWM 2B, K1.7 Boom
PWM 3A, K1.9 Jib
PWM 3B, K1.11 Jib
PWM 1A, K1.1 Slew
