Scanreco G2 radio remote control system
24
HMF Technical Service Department
Rev.:
20-13
Configuration of remote control levers, operation direction
In the previous chapter, configuration of remote control levers by means of the CGW 5355 is
described. In
Lever setup
(e.g. Lever setup 1
ENT
Lever 1-8, menu 1.1.1.1.2.8.1.1.6-13) the
position of the remote control levers, function, and operation direction are as standard defined as
indicated in the drawing of a remote control box with 8 linear remote control levers:
Remote control boxes with joystick have position, function and operation direction as indicated in
the table and in the drawings: 2-0-2, 2-2-2 and 3-2-3.
Joystick 2 has 2 proportional functions.
Joystick 3 has 3 proportional functions: cross and turn.
Scanreco ”MAXI”, crane functions, operation direction A
4 sections
6 sections
7 sections
8 sections
Lever 1
Slew right
Slew right
Lever 2
Slew right
Boom down
Boom down
Lever 3
Slew right
Boom down
Jib up
Jib up
Lever 4
Boom down
Jib up
Extension out
Extension out
Lever 5
Jib up
Extension out
Fly-Jib, jib up
Fly-Jib, jib up
Lever 6
Extension out
Fly-Jib, jib up
/ Rotator right
Fly-Jib, extension
out
Fly-Jib, extension
out
Lever 7
Fly-Jib, extension
out
/ Grab open up
/ Winch down
Rotator right
Lever 8
Winch down
Grab open up
/ Winch down
Scanreco ”MAXI”, position of the levers, operation direction A
8 linear control levers
Joysticks 2-0-2
1
2
3
4
5
6
7
8
1
2
3
4
Joysticks 2-2-2
Joysticks 3-2-3
1
2
3
4
8
7
1
2
3
4
8
7
5
6
