HMF Scanreco G2, Руководство пользователя

Страница: 12 / 55

Scanreco G2 radio remote control system
12
HMF Technical Service Department
Rev.:
20-13
Survey of terminals in the radio controller
In the below table we have stated the number of the output terminals and output cables as well as
the signal.
Connection of output cables and the corresponding function can be found in the electric diagrams
for the Scanreco G2 radio remote control system.
Please note: In certain applications the output terminals may be configured for alternative
functions.
Terminals in
K1 socket Cable Signal Terminals
in K3
socket Cable Signal Terminals
in K4
socket Cable Signal
K1.1 1A PWM + K3.1 5A PWM + K4.1 EX1 ON-OFF 1
K1.2 1A PWM ÷ K3.2 5A PWM ÷ K4.2 EX1 ON-OFF 2
K1.3 1B PWM + K3.3 5B PWM + K4.3 EX1 ON-OFF 3
K1.4 1B PWM ÷ K3.4 5B PWM ÷ K4.4 EX1 ON-OFF 4
K1.5 2A PWM + K3.5 6A PWM + K4.5 EX1 ON-OFF 5
K1.6 2A PWM ÷ K3.6 6A PWM ÷ K4.6 EX1 ON-OFF 6
K1.7 2B PWM + K3.7 6B PWM + K4.7 EX1 GND (÷)
K1.8 2B PWM ÷ K3.8 6B PWM ÷ K4.8 EX1 DIG IN 1
K1.9 3A PWM + K3.9 7A PWM + K4.9 EX1 DIG IN 2
K1.10 3A PWM ÷ K3.10 7A PWM ÷ K4.10 EX1 DIG IN 3
K1.11 3B PWM + K3.11 7B PWM + K4.11 EX1 Input, VDC
K1.12 3B PWM ÷ K3.12 7B PWM ÷
K1.13 4A PWM + K3.13 8A PWM +
K1.14 4A PWM ÷ K3.14 8A PWM ÷
K1.15 4B PWM + K3.15 8B PWM +
K1.16 4B PWM ÷ K3.16 8B PWM ÷
Terminals in
K6 socket Cable Signal Terminals
in K7
socket Cable Signal Terminals in
K7 socket Cable Signal
K6.1 EX2 ON-OFF 7 K7.1 RC 12/24 V K8.1 EX3 CAN High
K6.2 EX2 ON-OFF 8 K7.2 RC GND (÷) K8.2 EX3 CAN Low
K6.3 EX2 ON-OFF 9 K7.3 RC Wire security K8.3 EX3 CAN ÷
K6.4 EX2 ON-OFF 10 K7.4 RC DMP ÷ K8.4 EX3 CAN High
K6.5 EX2 GND (÷) K8.5 EX3 CAN Low
K6.6 EX2 ON-OFF 11
K6.7 EX2 ON-OFF 12
K7.8 EX2 ON-OFF 13
K8.9 EX2 ON-OFF 14
K9.10 EX2 GND (÷)