7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
Section 6: Heli Programming Menu
94
95
T. Curve cont.
11. Press the back button to return to the model function menu.
To disable the throttle curve:
1. Scroll to highlight the “MIX” field in the throttle curve menu
and press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
3. Press the Back button to return to the model function menu.
- Scroll to the flight condition field and press the jog dial to
activate the menu.
- Choose the desired flight condition and press the jog dial to
confirm your selection.
You may also select a flight condition in this menu by activating the desired flight condition.
Note
Tip
Tip
Tip
Caution
P. Curve
The Pitch Curve function allows you to modify the normally-linear servo rate movement for collective
pitch by defining five different points along the pitch response curve. It is necessary to manipulate
the pitch curve in conjunction with the throttle curve to achieve maximum performance from your
helicopter.
To configure a pitch curve:
1. From the model menu, rotate the jog dial to highlight
“P.Curve” and press the jog dial once to enter the activation
menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the pitch curve
menu.
4. Scroll to the “1” field and press the jog button to activate the
menu.
P. Curve
7. Scroll to the “EXP” (exponential) field and press the jog button
to activate the menu.
8. Rotate the jog dial to select “OFF” or “ON”. When “ON” is
selected, the points in the curve are connected with
exponential curves. Otherwise, the points are joined linearly.
Press the jog dial to confirm your selection.
5. Rotate the jog dial to input the desired pitch position at this
point on the curve (Throttle stick full down).
9. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.
10. Scroll to select a switch to activate the camber mix. Press the jog dial to confirm your selection.
b. If you choose a switch:
- The current switch position will be displayed in the top
right field of the display as “0”, “1”, or “2”.
- Repeat steps 4-8 to define pitch curve for every switch
position.
6. Repeat steps 4 and 5 for the remaining four steps on the pitch curve. As values are changed, the on-
screen graph displays real-time updates to the pitch curve.
c. If you choose “Cond” (Flight Condition):
- The upper right field of the menu displays which flight
condition is currently active and will be programmed.
- Scroll to the flight condition field and press the jog dial to
activate the menu.
- Choose the desired flight condition and press the jog dial
to confirm your selection.
- Repeat steps 4-8 as applicable to define a pitch curve for
every flight condition.
a. If you choose the “NULL” option, the set pitch curve will remain active at all times for this model.
Содержание Flash7
Страница 1: ......