HITEC Flash7, Инструкция по эксплуатации, Страница: 18 / 52

7 Channel 2.4 GHz Aircraft Computer Radio System 7 Channel 2.4 GHz Aircraft Computer Radio System
Section 2: Quick Start Guides Section 2: Quick Start Guides
32 33
Model Select Menu
4. Reset the active model memory slot to factory default settings:
b. Scroll to “RESET” and press
the jog dial.
a. Select the model you wish
to reset.
c. When prompted that you want to reset the model, select yes and
press the jog dial to confirm your entry. You have now cleared all
of the programming for the model. The only settings that will
remain are the model name, receiver type and wing and tail types.
5. Delete a model memory:
a. In the model select menu, highlight the
model you wish to delete and press the jog dial.
b. Scroll to
“DELETE”
and press
the jog dial. c. When prompted
that you want to
delete the model,
select yes and
press the jog
dial to confirm
your entry.
6. Rename a model:
a. In the model select menu, highlight the model you wish to rename. Press the jog dial to confirm your
selection.
b. Scroll to RENAME and press
the jog dial to enter the nam
ing screen. d. Use the jog dial to scroll
through the characters and
press it once to select the char
acter.
e. Repeat steps c and d until you have renamed the model.
f. Press the back button to return to the model select menu.
c. In the field displaying the
current model name, scroll to
the character you want to
change and press the jog dial
to activate it. The cursor will
blink under the active character.
You can only reset the active model.
Note
Tip Tip
Tip
You cannot delete the active model.
Warning
Note
Tip Tip
Tip
Caution
The model type screen defines the features of the active model. These are the features we told the radio
our model had during the “create a new model” process plus all the default features. Here we can define
all the choices you have while setting up your aircraft in the Flash 7.
There are three types of aircraft “Model Type” menus:
Model Type Menu
1. From the System Menu select MDL TYPE.
2. Press the jog dial once to enter the Model Type Selection
Menu. ACRO is the first and default selection.
Model Type ACRO Menu Programming
3. Press the jog dial again to enter the ACRO setup menu.
4. Once in the ACRO setup menu you will set your wing and tail
choices. Scroll to the wing selection and press the jog dial to
activate the selections and scroll through the choices.
The choices for Normal ACRO wing type are:
1AILE – Single aileron servo
1AILE+1FLAP – Single aileron servo and single flap
servo
1AILE+2FLAP - Single aileron servo channel and two
flap servos
2AILE – Two aileron servos
2AILE+1FLAP - Two aileron servos and one flap servo
2AIL+2FLAP - Two aileron servos and two flap servos
ACRO: For all fixed wing, glow, gas and some electric powered models.
GLID: For all gliders and some electric powered models.
HELI: All Helicopters will use the HELI menu.